and civil camps and remote locations where infrastructure is scarce.
※Main Feature:
— Double Combustion Chamber
— Double Italy Burner
–Burning Rate: 10-100kgs per hour
–Combustion Chamber: 0.1M3-1.2M3
— Mobile Incinerator, Standard shipping containers, Easy to move/transport system
— Free Installation, Pre-installed incinerator, Ideal for camps
— Ultraviolet lamp sterilization inside
Nanjing Clover Medical Technology Co.,Ltd.
Tel: +86-25-8461 0201
| Items/Model |
TS10(PLC) |
TS20(PLC) |
TS30(PLC) |
TS50(PLC) |
TS100(PLC) |
| Burn Rate (Average) |
10 kg/hour |
20 kg/hour |
30 kg/hour |
50 kg/hour |
100 kg/hour |
| Feed Capacity(Average) |
20kg |
40kg |
60kg |
100kg |
200 kg |
| Control Mode |
PLC |
PLC |
PLC |
PLC |
PLC |
| Combustion Chamber |
100L |
210L |
330L |
560L |
1200L |
| Internal Dimensions |
50x50x40cm |
65x65x50cm |
75x75x60cm |
100x80x70cm |
120x100x100cm |
| Secondary Chamber |
50L |
110L |
180L |
280L |
600L |
| Smoke Filter Chamber |
Yes |
Yes |
Yes |
Yes |
Yes |
| Feed Mode |
Manual |
Manual |
Manual |
Manual |
Manual |
| Voltage |
220V |
220V |
220V |
220V |
220V |
| Power |
0.5Kw |
0.5Kw |
0.5Kw |
0.7Kw |
0.7Kw |
| Oil Consumption (kg/hour) |
5.4–12.6 |
7.8–16.3 |
10.2–20 |
12.1–24 |
14–28 |
| Gas Consumption (m3/hour) |
6.2–11.4 |
8–15.7 |
9.8–20 |
9.9–26.1 |
10–32.2 |
| Temperature Monitor |
Yes |
Yes |
Yes |
Yes |
Yes |
| Temperature Protection |
Yes |
Yes |
Yes |
Yes |
Yes |
| Oil Tank |
100L |
100L |
100L |
100L |
200L |
| Feed Door |
30x30cm |
45x40cm |
55x50cm |
70x55cm |
80x60cm |
| Chimney |
3Meter |
3Meter |
5Meter |
5Meter |
10Meter |
| Chimney Type |
Stainless Steel |
Stainless Steel |
Stainless Steel |
Stainless Steel |
Stainless Steel |
| 1st. Chamber Temperature |
800℃–1000℃ |
800℃–1000℃ |
800℃–1000℃ |
800℃–1000℃ |
800℃–1000℃ |
| 2nd. Chamber Temperature |
1000℃-1200℃ |
1000℃-1200℃ |
1000℃-1200℃ |
1000℃-1200℃ |
1000℃-1200℃ |
| Residency Time |
2.0 Sec. |
2.0 Sec. |
2.0 Sec. |
2.0 Sec. |
2.0 Sec. |
| Gross Weight |
1500kg |
2200kg |
3000kg |
4500kg |
6000kg |
| External Dimensions |
140x90x120cm |
160x110x130cm |
175x120x140cm |
230x130x155cm |
260x150x180cm |
Water treatment system
Water softener or R/O system shall be delivered with a capacity adapted to the need of the above steam
treatment system. The bidder shall indicate the capacity of the unit offered. To ensure good steam quality,
the contaminants in the feed water supplied to a steam generator in which no additional water treatment
is incorporated should not exceed the following parameters. If these parameters cannot be complied with,
an additional feed water treatment system shall be supplied (Water softener or R/O System)
“The water treatment plant to be supplied shall be able to supply the steam generator of the treatment
plant with a sufficient quantity of water with the following quality:
Determinant: Feed water:
1) Evaporation residue < 10 mg/l
2) Silicium oxide, SiO2 < 1 mg/l
3) Iron < 0.2 mg/l
4) Lead < 0.05 mg/l
6) Chloride (Cl’) < 2 mg/l
7) Phosphate (P2O5) < 0.5 mg/l
8) Conductivity (at 20 °C) < 15 μs/cm
9) pH value (degree of acidity) 5 to 7.5
10) Hardness (Σ Ions of alkaline) < 0.02 mmol/l
“
Compressed air generator
A compressed air generator has to be supplied for the pneumatic system of the treatment plant
and for maintenance purposes.
The compressed air supplied should have a pressure of 500 kPa to 700 kPa (5 bar to 7 bar), shall be
free of liquid water, shall be filtered to 25 μm and shall be free from oil droplets greater than 2 μm.
Uninterruptible Power System (UPS)
UPS system will be provided to brige over times of power cut for the PLC of the treatment plant.
The UPS shall automatically maintain AC power within specified tolerances to the critical load,
without interruption, during failure or deterioration of the normal power source. The manufacturer
shall design and furnish all materials and equipment to be fully compatible with electrical, environmental,
and space conditions at the site. It shall include all equipment to properly interface the AC power source
to the intended load and be designed for unattended operation. AC Output and Input shall be designed
to support the PLC and all electrical systems of the treatment plant and the steam generator
(without heating elements) for at least 10 minutes.
The UPS and all associated equipment shall be manufactured in accordance with the following
applicable standards: CSA 22.2, No. 107.1, IEEE 587, Category B (ANSI C62.41), National Electrical
Code (NFPA 70), NEMA PE-1, UL Standard 1778.
The Quality System for the engineering and manufacturing facility shall be certified to conform to
Quality System Standard ISO 9001 for the design and manufacture of power protection systems
for computers and other sensitive electronics.
“The UPS shall operate as an on-line reverse transfer system in the following modes:
A. Normal: The critical AC load is continuously powered by the UPS inverter. The rectifier/ charger
derives power from the utility AC source and supplies DC power to the inverter, while simultaneously float charging the battery.
B. Emergency: Upon failure of utility AC power, the critical AC load is powered by the inverter which,
without any switching, obtains its power from the battery plant. There shall be no interruption in
power to the critical load upon failure or restoration of the utility AC source.
C. Recharge: Upon restoration of the utility AC source, the rectifier/charger powers the inverter
and simultaneously recharges the battery. This shall be an automatic function and shall cause no interruption to the critical AC load.
D. Bypass: If the UPS must be taken out of service for maintenance or repair, the static transfer
switch shall transfer the load to the bypass source. The transfer process shall cause no interruption in power to the critical AC load.
E. Off-Battery: If the battery only is taken out of service for maintenance, it is disconnected from the rectifier/charger
and inverter by means of (an) external disconnect breaker(s). The UPS shall continue to function and meet all
of the specified steady-state performance criteria, except for the power outage back-up time capability.
“
The maximum working voltage, current, and di/dt of all solid-state power components and electronic devices
shall not exceed 75% of the ratings established by their
manufacturer. The operating temperature of solid-state component sub-assemblies shall not be greater
than 75% of their ratings. Electrolytic capacitors shall be computer grade
and be operated at no more than 95% of their voltage rating at the maximum rectifier charging voltage.
The AC output neutral shall be electrically isolated from the UPS chassis. The UPS chassis shall have an
equipment ground terminal. AC Output and Input shall be designed to support the PLC of the treatment plant for at least 5 minutes.
Wear and spare part package
A wear and spare part package for typical to be replaced parts for 2500 operation hours shall be supplied.
The wear and spare part package shall be for the treatment system as well as all other equipment. It shall
include but not limited to: lid seals, sets of all filters needed (including the necessary amount of validated
exhaust air filter for 2500 operation hours), pressure and temperature indicators, set of all safety valve
needed, sets of all fuses needed. Note: The spare part package cannot be used during the warranty period.
Supporting equipment
